Updating your USB Dongle

Introduction to Licence Manager

Our Licence Manager application has been designed to help you review and manage your software licence subscriptions on our Digital Detective security devices.

Installing Licence Manager

Licence Manager is a separate download that can be used to update and maintain your licenses.

To install the Licence Manager follow the steps outlined below:

1. Run the Licence Manager setup executable
2. Select your language (as shown in Figure 2)
   Figure 2
3. Follow the on screen instructions and accept the licence agreement (as shown in Figure 3)
   Figure 3
4. Select a destination folder for the Licence Manager tool (as shown in Figure 4) and a start menu folder
   Figure 4
5. Select the Install button to start the installation process..once this is complete select the Finish button (as shown in Figure 5)
   Figure 5

Procedure for Updating a USB Dongle

To update a dongle, please follow the following instructions:

• Run the Licence Manager software
• Insert the USB dongle you wish to update
• Click on the USB Dongle ID in the Installed Licences list
• Click the Update Dongle button

Each dongle is uniquely identified by an electronic ID number (Dongle ID) which is hard coded into the device (cannot be changed) and a serial number which is etched onto the outside of the device.  The Licence Manager can be used to review the licence information stored in the dongle and will also allow you to copy this information to the clipboard if required.

Detailed steps:

1. Install the Licence Manager (if not already installed)
2. Run the Licence Manager, the main screen should appear (as shown in Figure 6)
   Figure 6
3. In order to update your licence(s) you must plug in the dongle you wish to update into one of your machines USB ports.
   Once you have plugged in your dongle you will see the information associated with the dongle and any installed licence(s) (as shown in Figure 7)
   Figure 7

4. To update the dongle, simply click the Update Dongle button. The dongle will contact our licence server (as shown in Figure 8) and update your licence(s) accordingly
   Figure 8
   Once Licence Manager has finished updating your dongle, the information panels will reload showing you all the new details associated with the dongle.

    

   Licence is already up to date

   If your licence is already up to date you will receive a message stating this.

5. If you wish to Save your licence details you can do so by pressing the Save Details button. A dialog box will ask you where you wish to save your dongle information and save the file as a text file (as shown in Figure 9)
   Figure 9

   Using Multiple Dongles

   Licence Manager allows users to load multiple dongles into the application (as shown in Figure 10). However it is important to note you can only update one USB dongle at a time.
   Simply select the dongle you wish to update in the Installed Licences section and click the Update Dongle button

   Figure 10

   Once you have finished updating your licence(s) you may now close the Licence Manager and remove the USB dongle if you wish.