...
| Note |
|---|
Click NO when you are asked to select your devices and UTN Servers. As you will be accessing the dongle server over the Internet, you will need to add the IP address of the server manually. |
Step 3 - Add the UTN Server
With the UTN Manager running, select from the menu: UTN server » Add. The following screen will be displayed.
In the text box marked "Name or IP Address", please type the IP address provided by our Technical Support team. 
Do not change any of the port numbers.
...
Once the server has been added, your screen should show the server and corresponding IP address as shown below. The next stage is to set the Encryption Port Key to allow access to the device.
Select from the menu: UTN server » Enter user port key. You will see the following screen.
| Info |
|---|
| Our Technical Support Team will provide you with an encryption key and the corresponding USB port to enter the key. |
...
You will only need to enter the key into a single corresponding USB port. Once you click OK, you should see the following:
Step 5 - Access Dongle
To select the dongle, right click on the entry "Digital Detective Group Dongle" and select Activate. You should see the following:
| Note |
|---|
If this is the first time the dongle has been accessed, the Operating System will need to install the HID drivers for the dongle. This should only take a few seconds. Once Windows has completed installing the driver, the dongle will be connected to your system in exactly the same way as if you had inserted it into a USB socket. |
...